Croydon landlord gas safety checks and boiler servicing

· 12 min read · 2,355 words
Gas Safe engineer checking a boiler flue during a landlord gas safety inspection in Croydon

A boiler service and a landlord gas safety check serve different purposes, although they can be arranged together. For a landlord getting their rental property compliant with gas regulations in Croydon, a gas safety check is required before letting a property with gas appliances and every 12 months after that. The Health and Safety Executive says landlords must give current tenants a copy of the gas safety record within 28 days of the inspection.

Keeping the paperwork in order is only part of a landlord’s responsibility when getting a rental property compliant with gas regulations in Croydon. The inspection assesses gas appliances and flues, and the record must note defects and any action taken or required. A boiler service is separate maintenance, though arranging both during one visit may be practical.

This guide explains what the annual check covers, how the Gas Safety (Installation and Use) Regulations 1998 apply, and what tenants should receive. It also clarifies how a boiler service differs from a CP12 inspection, so you can understand what to arrange and what each visit is intended to do.

Key Takeaways

  • Keep the landlord gas safety record current and provide tenants with the required copy on time.
  • Understand how the Gas Safety (Installation and Use) Regulations 1998 set the inspection schedule for Croydon rentals.
  • Learn which appliances, fittings and flues a gas safety inspection covers, and how defects are recorded.
  • See how a boiler service differs from a CP12 check and when arranging both together may suit your property.

What is an Annual Landlord Gas Safety Certificate?

An Annual Landlord Gas Safety Certificate records the outcome of a gas safety inspection at a rented property. It is commonly called a CP12 and gives landlords and tenants a written safety record.

Tenant certificate deadlines

After an inspection, landlords must provide current tenants with a copy of the gas safety certificate within 28 days, according to the Health and Safety Executive. For a new tenancy, the record must be provided when the tenancy starts. These are separate handover points, so arrange the certificate around both the inspection date and any change of tenant. Keep a clear record of when each tenant receives their copy.

Certificate handover and record retention

Give each tenant the completed safety certificate, not just a verbal update that the gas safety inspection took place. The record helps tenants see the inspection outcome and any defects or remedial action recorded. The Health and Safety Executive says landlords must retain the gas safety certificate for at least two years. Keep it with the property’s tenancy records, so the inspection history and handover dates are easy to locate.

CP12 certificates for landlords and tenants

A CP12 is the common name for the landlord gas safety certificate issued after an inspection by a Gas Safe registered engineer. It records the check’s outcome for the landlord and tenant. Treat it as evidence of the inspection, rather than as a boiler service record: the documents relate to different work. Retain the CP12 and provide the tenant with their copy within the required deadline.

In Croydon, the council may investigate a landlord’s failure to provide a valid gas safety certificate. Where serious problems are found in a rented property, Croydon Council may issue a prohibition order or take emergency remedial action. Keeping the CP12, retention record and tenant handover details together makes it easier to demonstrate that the required steps were followed.

Gas Safety (Installation and Use) Regulations 1998

The gas safety duties for Croydon landlords are set out under the Gas Safety (Installation and Use) Regulations 1998, according to the UK legislation register. These duties cover inspections, records and safe management of gas installations in rented homes.

Landlord inspection requirements

Landlords in Croydon must have gas safety checks conducted every 12 months under the Gas Safety (Installation and Use) Regulations 1998, according to the Health and Safety Executive. A Gas Safe registered engineer is qualified to carry out the check. To find an engineer in Croydon, use the Gas Safe Register and check that their registration covers the work required. Arrange the inspection and keep its resulting record.

Annual checks and gas safety records

Plan each annual inspection before the previous record’s inspection date falls due. A CP12, also called a landlord gas safety record, documents the check and identifies defects and any action required or taken. For a new tenancy, provide the record when the tenancy starts. A practical compliance sequence is to arrange the inspection, address any defects recorded, retain the report and give the tenant their copy within the required deadline.

Inspection prices in Croydon

The inspection price depends on the property and the work required. Factors include the number and type of appliances, the inspection’s scope and access to the equipment. Describe the gas installation clearly when requesting a quote so the inspection can be scoped appropriately. A boiler service does not replace the separate gas safety inspection.

New tenancies and properties without gas appliances

Before letting a property with gas appliances, arrange a gas safety check and provide the new tenant with the record when the tenancy starts. If the home has no gas appliances, the specific inspection duty described here applies to properties with gas appliances. To make a Croydon rental property gas compliant, identify the gas appliances and installation, arrange the required check with a Gas Safe registered engineer, address recorded defects, then retain and hand over the CP12.

What Does the Inspection Cover?

A gas safety inspection assesses the gas appliances, fittings and flues in a rented property. In Croydon, the checks cover equipment and installation condition, not just whether a boiler appears to work.

Appliances, fittings and flues inspected

The engineer checks gas boilers and heaters, cookers and hobs, gas pipework, fittings, flues and chimneys. Carbon monoxide alarms may also be considered as part of the inspection. Each appliance is assessed individually, so a home with a boiler and gas hob has multiple items to inspect.

Checks include comparing burner pressure or gas rate with the manufacturer’s data plate. The engineer assesses ventilation and, where test points are available, standing and working pressure. They also check physical stability and, where appropriate, whether stability brackets are present and effective. Together, these checks help assess whether each appliance operates safely within its installation.

Flue flow is tested to assess whether products of combustion are removed. The engineer also tests whether flame failure devices operate satisfactorily. These checks apply across the inspected gas appliances and flues, including installations in Croydon homes across south London.

Pipework checks and unsafe appliances

Gas pipework and fittings are inspected alongside appliances and flues. The checks include testing appliances and pipework for gas tightness, which can reveal defects not apparent during ordinary operation. The inspection record should identify any defects and state what action is required or has been taken.

If an appliance fails its gas safety check, it must be repaired or isolated before a certificate can be issued. The engineer’s findings help identify whether any remedial work may be needed before the record is completed. Recording a fault alone does not resolve it: the appliance must be made safe through repair or isolation.

For a tenant-supplied gas appliance, the landlord remains responsible for maintaining the gas pipework serving it, but not the appliance itself. This distinction helps define the inspection’s scope in a Croydon rental property. The report records relevant defects and actions, giving the landlord and tenant a written account of the inspection.

Getting my rental property compliant with gas regs Croydon

Combined boiler servicing and CP12

A boiler service and a CP12 gas safety check have different purposes. The service concerns boiler maintenance; the CP12 records the outcome of a landlord gas safety inspection. Arranging both during one visit can be convenient, but combining appointments doesn’t turn them into one check. Each task should be clear, and the required safety record must still be completed following the inspection.

For a rental property, plan the CP12 around its due date and consider whether the boiler also needs servicing. Tell the engineer you want both tasks, so the appointment accounts for the separate work. A Gas Safe registered engineer carrying out the inspection assesses the gas installation and records any defects or actions required. A boiler service should not be treated as a replacement for that inspection or its written record.

Keep the paperwork distinct. The CP12 documents the landlord gas safety check, while any record of boiler servicing relates to maintenance. This matters if a tenant asks for the safety certificate or if a later inspection needs to establish what was checked. If the inspection raises safety concerns, discuss the next steps with the engineer before relying on the certificate. The maintenance appointment doesn’t remove that requirement.

Before arranging a combined visit, list the boiler and other gas appliances in the property, and explain that you need both a service and a safety inspection. Provide access to the appliances and flues, then keep the completed safety record ready for the tenant. Coordinate the appointments where practical, but keep inspection, maintenance and their records distinct.

If the boiler needs replacing rather than servicing, discuss a boiler installation for the property.

PSP & Gas Engineering

PSP & Gas Engineering can help Croydon landlords arrange gas safety inspections and address related gas-system concerns. Its Gas Safe registered engineers carry out inspections, while flue relining and video inspections can help investigate or resolve flue issues. Boiler installations are also available when a replacement is needed.

Contact the company when you need an inspection for a rented property, have a concern about a flue, or need to plan a boiler replacement. Sharing details of the property’s gas appliances and the work required helps establish the next step. The inspection record remains an important part of your landlord responsibilities, including providing it to tenants and retaining it.

For help with your rental property’s gas safety requirements in Croydon, contact PSP & Gas Engineering to arrange an inspection.

Take the next step with confidence

For landlords getting a rental property compliant with gas regulations in Croydon, the next step is to turn inspection findings into a clear plan. Address recorded defects, organise the relevant documents and decide whether further gas work is needed. Keep maintenance decisions and tenant communication aligned to manage the process clearly.

PSP & Gas Engineering provides Gas Safety Inspections, Boiler Installations and Flue Relining for landlords dealing with gas safety and related property work. The appropriate service depends on the inspection findings and the condition of the installation. To discuss what to do next, contact PSP & Gas Engineering.

A practical plan gives you a clear way forward for your Croydon rental property.

PSP & Gas Engineering for Rental Property Gas Compliance

PSP & Gas Engineering offers Gas Safety Inspections for landlords getting a rental property compliant with gas regulations in Croydon. Turn to the team when you need an inspection as part of addressing your property’s gas safety requirements.

If the inspection identifies a need for further work, PSP & Gas Engineering also provides Boiler Installations, Flue Relining, Video Inspections and Plumbing Services.

Frequently Asked Questions

Can you inspect the property if the tenant is at home?

Yes, a tenant can be at home during a gas safety inspection, provided access is arranged. Coordinate a suitable time with them and explain which rooms or appliances the engineer needs to reach. Landlords are advised to give tenants at least 24 hours’ notice before arranging access. For example, if the boiler is in a cupboard, make sure the tenant knows it needs to be accessible.

What happens if I don't have a valid gas safety certificate?

You may face enforcement action if you fail to hold a valid gas safety certificate for a rented home with gas appliances. Croydon Council may investigate, and serious problems can lead to a prohibition order or emergency remedial action. Failing to hold a valid gas safety certificate may have serious consequences. Keep the inspection record and tenant handover evidence together to help demonstrate the steps taken.

What’s Included in a Gas Safety Check?

A gas safety inspection assesses the gas appliances, fittings and flues within its scope, including their operation and installation condition. For example, an engineer may test gas tightness, ventilation and flue flow, and assess whether flame failure devices work satisfactorily. The written record identifies defects and any action required or taken. This distinguishes a completed inspection from maintenance work such as a boiler service.

What are the UK landlord gas safety requirements for rental properties?

Landlords must manage gas appliances, pipework and flues safely in a rented property supplied with gas. This includes arranging checks, keeping the resulting record and providing it to tenants. Responsibility also covers pipework serving an appliance supplied by a tenant, although the landlord is not responsible for maintaining the tenant-supplied appliance itself. The property’s gas arrangements determine which parts need attention.

How often must a landlord arrange a gas safety check and renew the Gas Safety Record?

Arrange a gas safety check every 12 months and obtain a new Gas Safety Record after each inspection. Use the inspection date to plan the next check, rather than waiting until a tenant asks for updated paperwork. Give current tenants their copy within 28 days of the inspection, and provide it to new tenants when their tenancy starts. Retain the record for at least two years.

What must a landlord do if a gas safety check finds a fault or unsafe appliance?

Arrange for any fault to be addressed, and ensure an unsafe appliance is repaired or isolated before a certificate can be issued. The inspection record should identify the defect and the action required or taken. For example, a boiler that fails a safety check cannot be treated as compliant simply because the inspection has been documented. The remedial action must be recorded.

More Articles